Place a second router that comes with an RJ45 cable from the main router’s LAN port to the second router WAN port. To make a LAN to WAN connection you need the following: To extend beyond 100 – 120 meters, use a normal switch. Do not exceed a distance of 100 – 120 meters between the routers or you might experience poor data transfer from the main router to the second router. Wi-fi access will be available with separate settings from the main router so it’s independent. If you don’t do this, all the addresses will get in conflict with the first main router so it’s a NO NO. 
Disable DHCP from the second router so it won’t give IP addresses.In this example, we will set 192.168.0.100 for the second router. Set the LAN address of the second router as anything from between 192.168.0.2 to 192.168.0.255 (like you would set a normal device address).
Place a second router that comes with an RJ45 cable from the main router’s LAN port to the second router LAN port. Enable DHCP letting it give an IP address to all the devices connected to it: 192.168.0.2 – 192.168.0.255. Set the main router as 192.168.0.1 (for it’s main LAN address). To make a LAN to LAN connection you need the following: The interface has many options such as WAN, LAN, DHCP lease, bind address by mac, bind address to a certain device, wi-fi properties, PPPoE authentication etc.Ī normal simple router has only 255 addresses available from which 1 is reserved to the main router. To expand the network with two routers while also getting Wi-fi advantage in the zones that routers are placed we can use LAN TO LAN network or LAN TO WAN networkĮach router has an interface designed to be simple to the user. 
Since this post is not about VLAN/management switch technology, I will only explain about routers. Sometimes the IP addresses can reach the maximum number if there are too many devices in a network in which case, it needs to be extended with an additional router or a switch. As most of us already know routers are able to give devices that are in the same network with it an IP address, which helps identify and separate devices within a network and to avoid conflicts of addresses. How to build a larger network with routers (when you don’t want to spend money on expensive switch equipment while also getting the advantage of wireless technology that routers have?
0 kommentar(er)
